MarrFill Finish PU

Topcoat

Product Description

MarrFill Finish PU is a two-component, transparent, water-emulsifiable polyurethane resin witout solvents. This product is used as a mat topcoat for coating systems in schools, garages, hospitals, showrooms etc. It can be applied to polyurethane or epoxy coatings. MarrFill Finish PU is very elastic, durable and resistant to various chemicals. The resulting substrate is less susceptible to scratches and easy to clean.

Properties

Consumption & Packaging

Usually ca. 100-150 g/m²
Sets of 10 kg

Application

Easy to apply with a 25 cm wide epoxy roller. Clean tools with water after use.

Technical Information

Technical Data

Finish	Matt
Colour	Transparent
Solid Content	45%
Density	1,05 kg/ltr
Mixing viscosity (25°C)	ca. 25 mPa:s
Mixing time	2-3 minutes
Drying Times (20°C / 50% R.H.)	Fully cured after 7 days
Processing time 20°C	minimal 1 hour
Shore D-hardness	ca. 80
Wear resistance	< 3.000 mg
Mixing ratio	5:1 parts by weight
Application Conditions	minimally 5°C, maximally 30°C

Project Detailing

Surface Preparation

Substrate Requirements

01

Ensure that the substrate is dry and absorbent, free from substances that may negatively affect adhesion, such as oils or greases.

Mixing Instructions

02

Add component B completely to component A and mix thoroughly with a slow-running drill at a maximum speed of 300 revolutions per minute for two minutes.