CorrFill Primer DL

Primer

Product Description

Ready to use fixing primer based on solvent and chlorinated rubber with a very good adhesion on multiple surfaces. CorrFill Primer DL has been developed as a first layer in a Ribbstyle coating system to acquire a good adhesion on the substrate. Mainly used for coated steel and sandwich panels.

Properties

Consumption & Packaging

Usually 10 – 15 m²/ltr
Containers of 5 ltr

Application

Easy to apply with roller or brush. After use clean tools with CorrFill Thinner DLT.

Technical Information

Technical Data

Finish	Satin
Colour	Grey
Solid Content	ca. 45-50% (weight) / ca. 36-38% (volume)
Density	1,07 -1,11 g/cm³
Flashpoint	> 23°C
VOC-Content	max. 550 g/ltr
EU limit values	750 g/ltr (2007) / 750 g/ltr (2010)
Layer Thickness	10 - 15 m²/ltr
Drying Times (20°C / 50% R.H.)	Repaintable after 12 hours Fully cured after 24 hours
HS Code	32089091
UN-code	1263

Project Detailing

Surface Preparation

Clean and Degrease Substrate

01

Thoroughly clean and remove any grease or dirt from the substrate surface

Consider Substrate Type

02

If the substrate is acrylic paint, do not recoat it with CorrFill Primer DL.

Use CorrFill Primer PA Instead

03

Primer is suitable for use on acrylic paint substrates and will not cause any adverse reactions.

Sustainability & Storage

CorrFill Primer DL has a shelf life of 24 months, provided that unopened buckets are properly closed and stored frost-free, in a dry and well-ventilated area, not in direct sunlight, between 5°C and 25°C.