CorrFill Limbercoat

Protective layer

Product Description

CorrFill Limbercoat is a two-component, elastic and very strong protective layer based on polyurethane combinations. This coating is often used in spaces with high humidity and high temperatures. CorrFill Limbercoat is usually applied in large industrial constructions such as compost tunnels.

CorrFill Limbercoat

CorrFill Limbercoat is a two-component, polyurethane-based elastic protective coating

Properties

Consumption & Packaging

Usually 600 g/m²
Sets of 10 kg

Composition

Application

Easy to apply with a roller or paint brush. Clean tools with CorrFill Thinner DLT after use.

Advantages

Technical Information

Technical Data

Finish	Satin Gloss
Colour	Red, White
Solid Content	100%
Density	1,53 kg/ltr (comp A) 1,23 kg/ltr (comp B)
Flashpoint	n/a
Drying Times (20°C / 50% R.H.)	Tack-free after 24 hours Mechanically resistant after 3 days Chemically resistant after 7 days
Application Conditions	Minimally 12°C, optimally 15°C - 25°C
HS Code	29054500 (comp A) 39033100 (comp B)

Project Detailing

Surface Preparation

Substrate Preparation

01

Begin by thoroughly cleaning and degreasing the surface to remove any dirt or grease.

Ensure Surface Conditions

02

For concrete and stone surfaces, it’s crucial that they are completely dry before applying the coating.

Mix Resin Material with Hardener

03

Prepare the coating material by mixing the granular resin with the hardener according to the specified ratio.

Sustainability & Storage

CorrFill Limbercoat has a shelf life of 24 months, provided that opened buckets are properly closed and stored frost-free, not in direct sunlight, between 5°C and 25°C.