CorrFill Indoor Coat

Moisture and vapour-proof coating

Product Description

CorrFill Indoor Coat has been developed for the vapourtight finishing of specific structures and is usually applied as a vapour-proof protective layer in large construction projects and industrial buildings. The coating is frequently used in rooms with high humidity and high temperatures.

Corofill Indore coat - air-tight XT

CorrFill Indoor Coat is a vapour- and moisture-tight coating designed for high-humidity areas.

Properties

Consumption & Packaging

Usually 2 kg/m²
Buckets of 25 kg

Composition

Acrylate-based with a solid content of 60% (volume) and 70% (weight). It’s free from tar or asphalt and has a high VOC content (max. 30 g/ltr)

Application

Easy to apply with roller, brush or airless-spraying machine. Clean tools with water after use.

Advantages

Technical Information

Technical Data

Finish	Satin Matt
Colour	White
Solid Content	ca. 70% (weight) / ca. 60% (volume)
Density	1.4 g/cm³
Flashpoint	n/a
Viscosity	400 P (Brookfield 20 Rpm)
VOC-Content	max. 30 g/ltr
Layer Thickness	2 kg/m²
Drying Times (20°C / 50% R.H.)	Repaintable After 24 Hours Fully Cured After 48 Hours
Application Conditions	min. 5°C / max. 80% R.H.
HS Code	32091000

Project Detailing

Surface Preparation

01

Begin by thoroughly cleaning and degreasing the substrate surface to remove any dirt or grease.

Direct Application on Specific Surfaces

02

CorrFill Indoor Coat can be directly applied onto polystyrene and PU foam substrates without the need for additional priming.

Pre-Treatment for Other Surfaces

03

The pre-treatment enhances adhesion and promotes compatibility between the substrate and the coating.

Sustainability & Storage

CorrFill Indoor Coat has a shelf life of 24 months, provided that opened buckets are properly closed and stored frost-free, not in direct sunlight, between 5°C and 25°C.